Suntan Metallized Polypropylene Film Capacitor - MPP - TS07

Suntan Technology Company Limited
--All Kinds of Capacitors

На этой неделе мы хотели бы представить наш металлизированный полипропиленовый пленочный конденсатор — MPP — TS07 со следующими характеристиками:
Высокая надежность из-за его превосходной производительности самовосстановления.
Коэффициент рассеяния обычно низкий, и он устойчив к высокой частоте и изменению температуры.
Рекомендуется для высокочастотных цепей, таких как s-образная компенсационная цепь.

Рабочая температура от -40°C до + 85°C
Бешеное напряжение постоянного тока 100 В, 250 В, 400 В, 630 В
Диапазон емкости от 0,01 до 8,2 Мф/д
Допустимое отклонение емкости ±5%, ±10%, ±20%
Сопротивление изоляции UR>100В,C≤0,33 мкФ,;IR≥25000 МОм, C>0,33 мкФ IR≥7500S.
UR<100 В, C≤0,33 мкФ,; IR≥12500 МОм, C>0,33 мкФ IR≥3750SКоэффициент рассеяния ≤0,001 при 1 кГц (обычно 0,002 макс.)

Suntan With Coated Potentiometers and Wire-Wound Potentiometers

Previous blog we talk about Potentiometers by means of construction, they can be divided into 2 groups: coated and wire-wound. Now let us to to know more related details of it.

With coated potentiometers, (as shown follow figure), insulator body is coated with a resistive material. There is a conductive slider moving across the resistive layer, increasing the resistance between slider and one end of pot, while decreasing the resistance between slider and the other end of pot.

Wire-wound potentiometers are made of conductor wire coiled around insulator body.  There is a slider moving across the wire, increasing the resistance between slider and one end of pot, while decreasing the resistance between slider and the other end of pot. Wire-wound potentiometers are used in devices which require more accuracy in control. They feature higher dissipation than coated pots, and are therefore in high current circuits. Construction of a wire-wound circular potentiometer (as shown follow figure). The resistive element (1) of the shown device is trapezoidal, giving a non-linear relationship between resistance and turn angle. The wiper (3) rotates with the axis (4), providing the changeable resistance between the wiper contact (6) and the fixed contacts (5) and (9). The vertical position of the axis is fixed in the body (2) with the ring (7) (below) and the bolt (8) (above).

Coated pots are much more common. With these, resistance can be linear, logarithmic, inverse-logarithmic or other, depending upon the angle or position of the slider. Most common are linear and logarithmic potentiometers, and the most common applications are radio-receivers, audio amplifiers, and similar devices where pots are used for adjusting the volume, tone, balance, etc..

Page:[«]1[»]