Capacitors Blog

NIC Components has unveiled a new range of film chip capacitors which are designed to offer stable characteristics over a wide operating temperature range.

The NSMX series of wound, metallised polyphenylene sulphide film capacitors can be used in applications that require low-absorption characteristics.

According to the company, they are suitable for use in power supplies requiring low-loss parameters.

The product has an operating temperature range of -40 degrees c to 125 degrees c and is RoHS compliant.

NSMX series is also compatible with the latest SAC reflow soldering processes up to 260 degrees c.

The firm states that it has very stable temperature, frequency, voltage, bias and dielectric absorption, with ElectronicsTalk stating that this makes them an alternative to other dielectrics such as MLCCs.

Meanwhile, Vishay recently announced the release of three new X2 electromagnetic interference suppression film capacitors, which it claims offer an increased voltage rating while continuing to meet safety approvals.

Rapid Electronics are a leading UK supplier of electronic components, electrical products and industrial equipment to the Assembly Manufacturer sector

Metallized Plastic Film Capacitors usually use polyester or polycarbonate as their insulator and are known for their self-healing properties. This means that one of these capacitors can be hit with high-pulsed voltages without seriously damaging the insulation. These capacitors are small and reliable, though it has a lower maximum current holding ability due to its thin metal plates.

Suntan Metallized Plastic Film Capacitors include TS02 ,TS03,TS04, TS05 ,TS07 ,TS08 ,TS09.All these types of Metallized Plastic Film Capacitors

have detailed introduce their Specification , Features . In our suntan website www.suntan.com.hk ,You can find more information about Metallized Plastic Film Capacitors. If you have any enquiry, Welcome to send email to our sales.

Suntan Technology Company Limited
----All Kinds of Capacitors

Suntan the best sell Polypropylene Film Capacitor is Metallized Polypropylene Film Capacitor - X2 - TS08S. For TS08S Capacitor, It Provides interference suppression with CE & TUV and UL safety approvals. And TS08S also have High dv/ dt capabilities.TS08S Capacitor is widely used in the electrical Industry. Suntan St mark TS08S Capacitor is popular in the oversea market.

Polypropylene Film Capacitor is used in such devices as pulse-handle circuits, stable oscillators and sample-and-hold circuits. Due to a balanced profile of a higher dielectric strength than polycarbonate, strong insulation and low moisture absorption, this film capacitor is one of the most frequently used. This capacitor can also be combined with foil, metalized film or others, depending on the need. Self-healing is also available in this capacitor. If an over-voltage occurs, however, polypropylene has a tendency to be damaged.

Extremely low dissipation factor, higher dielectric strength than polycarbonate and polyester films, low moisture absorption, and high insulation resistance. May use plates of foil, metalized film, or a combination. Film is compatible with self-healing technology to improve reliability. Usable in high frequency applications and high frequency high power applications such as induction heating (often combined with water-cooling) due to very low dielectric losses. Larger value and higher voltage types from 1 to 100 μF at up to 440 V AC are used as run capacitors in some types of single phase electric motors.

The Metallized Polypropylene Capacitors features suntan's new safety construction for increased capacitor safety. This patterned metallization technology allows current to flow past a failed point bypassing failed cells and therefore increasing capacitor safety. The miniaturized footprint is the choice for application downsizing where smaller case sizes are required.

Features & Benefits
High product safety
Open failure mode
Miniaturized size
Low audible noise
Excellent frequency characteristics
Low dissipation factor
RoHS compliant

Suntan Technology Company was founded as professional manufacturer of Film Capacitor. The features of film capacitor are non-inductive construction, self-healing, high reliable and superior performance in high frequency applications. It is applied to filter and noise suppression circuit, pulse logic and timing circuit, DC blocking, by-passing and signal coupling in general communication equipment.

Suntan Technology Company Limited
---All Kinds of Capacitors

Suntan hot offer Mylar capacitors, below shows you the features.

Good reputation in use with consumer & industrial electronics. 
Optimum for automatic insertion due to their small size and light weight.
Coated with epoxy resin for superior heat resistance, humidity resistance and solvent resistance.

Also Suntan is a manufacturer of Plastic Film Capacitors, Trimming Potentiometers, Capacitors, Varistors and so on. The more details you can look through the website: http://www.suntan.com.hk/
http://www.suntan.com.hk/Plastic-Film-Capacitors/Mylar-Capacitor.html

We are welcome to received your inquire and solve you problem.

A mylar capacitor uses mylar, which is a type of high temperature polyester film, as its dielectric. It is typically very stable and able to operate over a wide range of temperatures, usually up to 125 degrees Celsius. As such therefore this type is a common choice for instrumentation equipment, also high quality audio and communications equipment. There may be various shapes, sizes and styles of construction but possibly the longest lived and most recognisable style is the green or brown resin-dipped radial type, which coupled with a small physical size makes it readily suitable for circuit boards.

Suntan Technology Company Limited
----All Kinds of Capacitors

Suntan offer good quality and full series of Capacitors.Welcome to send inquire mail to sales@suntan.com.hk for us or if you have any questions you could give us a call.Our call number is (852) 8202 8782.

Below is our current hot off capacitors.

TS08S 275VAC Metallized Polypropylene Film Capacitor - X2

0.01uF        275VAC   10%   RoHS

0.1uF          275VAC   10%   RoHS

0.22uF        275VAC   10%   RoHS

0.47uF        275VAC   10%   RoHS

0.56uF        275VAC   10%   RoHS

1uF             275VAC   10%   RoHS

This capacitor uses thin polyester film as the dielectric.

They are not high tolerance, but they are cheap and handy. Their tolerance is about ±5% to ±10%.

From the left in the photograph
Capacitance: 0.001 µF (printed with 001K)
[the width 5 mm, the height 10 mm, the thickness 2 mm]
Capacitance: 0.1 µF (printed with 104K)
[the width 10 mm, the height 11 mm, the thickness 5mm]
Capacitance: 0.22 µF (printed with .22K)
[the width 13 mm, the height 18 mm, the thickness 7mm]