Capacitors Blog

Suntan Technology Company Limited
---All kinds of Capacitors

• The capacitor's function is to store electricity, or electrical energy.
• The capacitor also functions as a filter, passing alternating current (AC), and blocking direct current (DC).
• This symbol is used to indicate a capacitor in a circuit diagram.

The capacitor is constructed with two electrode plates facing eachother, but separated by an insulator.

When DC voltage is applied to the capacitor, an electric charge is stored on each electrode. While the capacitor is charging up, current flows. The current will stop flowing when the capacitor has fully charged.

When a circuit tester, such as an analog meter set to measure resistance, is connected to a 10 microfarad (µF) electrolytic capacitor, a current will flow, but only for a moment. You can confirm that the meter's needle moves off of zero, but returns to zero right away.

When you connect the meter's probes to the capacitor in reverse, you will note that current once again flows for a moment. Once again, when the capacitor has fully charged, the current stops flowing. So the capacitor can be used as a filter that blocks DC current. (A "DC cut" filter.)

However, in the case of alternating current, the current will be allowed to pass. Alternating current is similar to repeatedly switching the test meter's probes back and forth on the capacitor. Current flows every time the probes are switched.

The value of a capacitor (the capacitance), is designated in units called the Farad ( F ).

The capacitance of a capacitor is generally very small, so units such as the microfarad ( 10-6F ), nanofarad ( 10-9F ), and picofarad (10-12F ) are used.

Recently, an new capacitor with very high capacitance has been developed. The Electric Double Layer capacitor has capacitance designated in Farad units. These are known as "Super Capacitors."

Sometimes, a three-digit code is used to indicate the value of a capacitor. There are two ways in which the capacitance can be written. One uses letters and numbers, the other uses only numbers. In either case, there are only three characters used. [10n] and [103] denote the same value of capacitance. The method used differs depending on the capacitor supplier. In the case that the value is displayed with the three-digit code, the 1st and 2nd digits from the left show the 1st figure and the 2nd figure, and the 3rd digit is a multiplier which determines how many zeros are to be added to the capacitance. Picofarad ( pF ) units are written this way.

For example, when the code is [103], it indicates 10 x 103, or 10,000pF = 10 nanofarad( nF ) = 0.01 microfarad( µF ).

If the code happened to be [224], it would be 22 x 104 = or 220,000pF = 220nF = 0.22µF.

Values under 100pF are displayed with 2 digits only. For example, 47 would be 47pF.

The capacitor has an insulator( the dielectric ) between 2 sheets of electrodes. Different kinds of capacitors use different materials for the dielectric.

Suntan Technology Company Limited
---All kinds of Capacitors

This is a measure of a capacitor's ability to store charge. A large capacitance means that more charge can be stored. Capacitance is measured in farads, symbol F. However 1F is very large, so prefixes are used to show the smaller values.

Three prefixes (multipliers) are used, µ (micro), n (nano) and p (pico):

• µ means 10-6 (millionth), so 1000000µF = 1F
• n means 10-9 (thousand-millionth), so 1000nF = 1µF
• p means 10-12 (million-millionth), so 1000pF = 1nF

Capacitor values can be very difficult to find because there are many types of capacitor with different labelling systems!

There are many types of capacitor but they can be split into two groups, polarised and unpolarised. Each group has its own circuit symbol.

Suntan Technology Company Limited
---All kinds of Capacitors

A capacitor is a passive electronic component that storesenergy in theform of an electrostatic field. In its simplest form, a capacitorconsists of twoconducting plates separated by an insulating material called thedielectric. Thecapacitance is directly proportional to the surface areas of the plates, andis inverselyproportional to the separation between the plates. Capacitance alsodepends on thedielectric constant of the substance separating the plates.

The standard unit of capacitance is the farad, abbreviatedF. Thisis a large unit; more common units are the microfarad, abbreviated µF (1 µF =10-6F) and the picofarad, abbreviated pF (1 pF = 10-12 F).

Capacitors can be fabricated onto integrated circuit (IC)chips. They are commonly used in conjunction with transistors in dynamic random access memory (DRAM). The capacitors helpmaintain thecontents of memory. Because of their tiny physical size, thesecomponents have lowcapacitance. They must be recharged thousands of times per second or theDRAM willlose its data.

Large capacitors are used in the power supplies of electronicequipment ofall types, including computers and their peripherals. In these systems,thecapacitors smooth out the rectified utility AC, providing pure, battery-likeDC.

Suntan Technology Company Limited
---All kinds of Capacitors

NIC Components has unveiled a new range of film chip capacitors which are designed to offer stable characteristics over a wide operating temperature range.

The NSMX series of wound, metallised polyphenylene sulphide film capacitors can be used in applications that require low-absorption characteristics.

According to the company, they are suitable for use in power supplies requiring low-loss parameters.

The product has an operating temperature range of -40 degrees c to 125 degrees c and is RoHS compliant.

NSMX series is also compatible with the latest SAC reflow soldering processes up to 260 degrees c.

The firm states that it has very stable temperature, frequency, voltage, bias and dielectric absorption, with ElectronicsTalk stating that this makes them an alternative to other dielectrics such as MLCCs.

Meanwhile, Vishay recently announced the release of three new X2 electromagnetic interference suppression film capacitors, which it claims offer an increased voltage rating while continuing to meet safety approvals.

Rapid Electronics are a leading UK supplier of electronic components, electrical products and industrial equipment to the Assembly Manufacturer sector.