Capacitors Blog

Suntan Technology Company Limited
---All Kinds of Capacitors

Suntan is a Hong Kong based manufacturer of Aluminum Electrolytic Capacitors, Including Snap-in type Electrolytic Capacitor, Screw type and LUG type Aluminum Electrolytic Capacitor, Axial & Radial Electrolytic Capacitor and SMD Aluminum Electrolytic Capacitor etc.

Suntan Best Seller of Aluminum Electrolytic Capacitors : 

TS14 --- Aluminum Electrolytic Capacitors - Radial Type High Temperature 105°C, General
TS13DE-CD110X --- Aluminum Electrolytic Capacitors - Radial Type Super Miniaturized 85°C, General
TS13C0 --- Aluminum Electrolytic Capacitors - SMD Standard Series

Suntan Technology Company Limited
---All Kinds of Capacitors

Suntan is a Hong Kong based manufacturer of  Aluminum Electrolytic Capacitors , Trimming Potentiometers, Capacitors, Varistors and Diodes. The capacitors  are our main products. Today, we introduce the TS13DS-CD296 series of snap-in aluminum electrolytic capacitors.

Features

• Load life of 3000 hours at 105℃, equal to 96000 
• Hours (11 years) at 55℃ 
• High ripple current 
• Smaller Size 
• PCB Mounting

Specifications

Operating Temperature Range(℃): -40~+105
Capacitance Tolerance(25℃, 120Hz): ±20% 
Load Life (+105℃):Time 3000hours 
Not more than the specified value.
Within±20% of the initial value
Not more than 200% of the specified value

More details please refer to our datesheet link: 
http://www.suntan.com.hk/pdf/Aluminum-Electrolytic-Capacitors/TS13DS-CD296.pdf

Suntan Technology Company Limited
----All Kinds of Capacitors

An electrolytic capacitor is a type of capacitor that uses an electrolyte (an ionic conducting liquid) as one of its plates to achieve a larger capacitance per unit volume than other types, but with performance disadvantages. All capacitors conduct alternating current (AC) and block direct current (DC) and can be used, amongst other applications, to couple circuit blocks allowing AC signals to be transferred while blocking DC power, to store energy, and to filter signals according to their frequency. Although most electrolytic capacitors are polarized; hence, they can only be operated with direct current (DC). The large capacitance of electrolytic capacitors makes them particularly suitable for passing or bypassing low-frequency signals and storing large amounts of energy. They are widely used in power supplies and for decoupling unwanted AC components from DC power connections.
 
Electronic capacitors are one of the most widely used electronic components. These electronic capacitors only allow alternating or changing signals to pass through them, and as a result they find applications in many different areas of electronic circuit design. Suntan supply a wide variety of types of capacitor including electrolytic, ceramic, tantalum, plastic, sliver mica, and many more. Each capacitor type is introduced in www.suntan.com.hk.
 
Two types of electrolytic capacitor are in common use: aluminum and tantalum. Tantalum capacitors have generally better performance, higher price, and are available only in a more restricted range of parameters. Solid polymer dielectric aluminum electrolytic capacitors have better characteristics than wet-electrolyte types—in particular lower and more stable ESR and longer life—at higher prices and more restricted values. 

If you have interested in this hot products and need more information ,Please see our website www.suntan.com.hk. and contact us,Thanks! 

Suntan Technology Company Limited
----All Kinds of Capacitors

One of the main application classes of aluminum electrolytic capacitors is input capacitors for power inverters.
The aluminum electrolytic capacitor provides a unique value in high energy storage and low device impedance. How you go about selecting the right capacitor or capacitors, however, is not a trivial matter.

Selecting the right capacitor for an application requires a knowledge of all aspects of the application environment, from mechanical to thermal to electrical. The goal of this paper is to assist you with selecting the right capacitor for the design at hand.

Capacitor ripple current waveform considerations. Inverters generally use an input capacitor between a ectified line input stage and a switched or resonant converter stage.

Suntan Technology Company Limited
---All kinds of Capacitors

In many ways capacitors are the hidden saving grace of the electronics world. They play an essential role in smoothing switch transitions by storing and releasing a small amount of energy over short time scales. Although inductors can play the same role, I think it is safe to say that without small, accurately valued capacitors the modern electronics industry would be a very different beast. Essentially, capacitors store charge, which means that the amount of charge they can store is related to the area available to put said charges. Over recent years, the development of better control over small scale structuring has lead to large increases in capacitance in relatively small packages. The increases have been such that there have been some thoughts of putting these supercapacitors to work as battery replacements in applications where high currents are required.

On that front we can present some good news. Last month Science reported that scientists had observed an unexpectedly large increase in capacitance in some nanoporous materials. A capacitor at its most simple is a couple of parallel metal plates, where the capacitance increases with the size of the plates and as the two plates get closer together. Unfortunately, increasing the area without too much thought is a quick way to find yourself ordering another 19 inch rack for your capacitors, while sparks, ashes, and electrical fires come from the plates getting too close together. However, an alternative is to roughen the surface and include an electrolyte, which effectively replaces the second plate. This increases the surface area of the plates without increasing the volume. The development of nanoporous materials has lead to dramatic increases in the surface area of capacitors and hence a reasonably sized supercapacitor. Exploring nanoporous carbon for capacitance is nothing new, however, previous methods had very little control over the pore size. Here the researchers developed a different fabrication process that allows them to control the pore size to within 0.05nm. The process begins with a carbide substrate, which is a metal plus carbon atoms. They then etch the metal away by reacting it with chlorine, leaving the surrounding carbon structure intact. Since the amount of metal in a carbide depends on the which metal is used, the pore size can be controlled quite accurately by a good choice of metal and the amount of etching performed.

Once the pore size reduced to that below the electrolyte ion plus surrounding solvent molecules , the effect of the pores was reduced. This is because the increased surface area only works if the distance between the electrolyte and plate remains constant and once the pores get too small the charges on the inside of the pore are too far from the nearest electrolyte ion. However, a further decrease in pore size saw the capacitance increase again. It turns out that when the material is so porous, many of the carbon atoms are just barely hanging on. As a result they can move around quite a bit, which allows the electrolyte to squeeze in. The resulting tight fit between the two means that along with an effective increase in surface area, the gap between the two plates is also decreased. Both of these factors increase the capacitance.

I would say the future looked foamy but my glass is empty.

Suntan Technology Company Limited
---All Kinds of Capacitors

Aluminum electrolytic capacitor maker Lelon Electronics has seen extra orders from China appliance makers due to the China government's program to promote sales of home appliances in rural areas. The extra orders have covered Lelon's reduced orders from the US and Europe, the company said.

The price of aluminum electrolytic capacitors has been stable since August 2008, while the price of aluminum foil continues to drop, lowering Lelon's cost pressure. However, order visibility for aluminum electrolytic capacitors is still low, the company noted.

Lelon has entered the wind power market with its large-size capacitors, and plans to apply the product to other applications. The company has already shipped a small volume of large-size capacitors to a motorcycle maker and expects to expand into the automotive segment.

Suntan Technology Company Limited
---All kinds of Capacitors

NIC Components has unveiled a new range of film chip capacitors which are designed to offer stable characteristics over a wide operating temperature range.

The NSMX series of wound, metallised polyphenylene sulphide film capacitors can be used in applications that require low-absorption characteristics.

According to the company, they are suitable for use in power supplies requiring low-loss parameters.

The product has an operating temperature range of -40 degrees c to 125 degrees c and is RoHS compliant.

NSMX series is also compatible with the latest SAC reflow soldering processes up to 260 degrees c.

The firm states that it has very stable temperature, frequency, voltage, bias and dielectric absorption, with ElectronicsTalk stating that this makes them an alternative to other dielectrics such as MLCCs.

Meanwhile, Vishay recently announced the release of three new X2 electromagnetic interference suppression film capacitors, which it claims offer an increased voltage rating while continuing to meet safety approvals.

Rapid Electronics are a leading UK supplier of electronic components, electrical products and industrial equipment to the Assembly Manufacturer sector.

Suntan Technology Company Limited
---All Kinds of Capacitors

Advanced Capacitors World Summit 2009Final program confirmed featuring the latest in industry developments, applications and technology PORTLAND, Maine, January 6, 2009 —IntetechPira, a leading conference and research organization is pleased to announce the final program for the 7th annual Advanced Capacitors World Summit 2009 set for March 31 – April 2, 2009 at the Hilton Torrey Pines in La Jolla, CA, US.

Co-Chaired by Richard Smith, ANA Strategic System Group and Andrew Burke of the University of California Davis Institute of Transportation Studies, this year’s program is designed to help current and prospective users, integrators and suppliers of advanced power systems understand modern energy storage and delivery challenges for power intensive applications and identify business opportunities and realities with adopting advanced capacitors and capacitor hybrid systems to solve application energy requirements. Speakers will discuss the latest market trends and developments, power engineering and integration strategies, design and business implications and costs associated with advanced power systems for various applications, including transportation, automotive, power and consumer electronics and renewable energy.

Market Overview and industry developments:

Bobby Maher of M Cubed Consulting will start off the program with a comprehensive overview of ultracapacitor market trends and technology advancement and David Alexander from IVUS Energy Solutions, creator of the patented FlashPoint Power Technology, will address serious challenges that arise when developing capacitors for the market. Andy Burke of UC Davis will provide an engaging comparison of ultracapacitors and advanced battery technology in terms of performance, cost and versatility, while John Miller of Maxwell Technologies will show how the two technologies can be best applied in tandem. A panel presentation from members of the investment community will conclude the morning session and will provide insight on how to secure funding in uncertain economic times.

John Skibinski of Eaton Corporation will shed light on the growing demand for advanced energy storage technologies for wind and solar applications. Speakers from Volvo Technology Corporation, General Electric and NREL will discuss engineering energy storage systems for hybrid electric vehicles and heavy hybrids. Aerospace applications will be explored with presentations from Lockheed Martin Aeronautics and company partner PC Krause and Associates and additional new and emerging applications will be covered by Jin Song of Nesscap.

Olgierd Paluskinski of the University of Arizona and M Grant Norton of GoNano Technologies will discuss the latest work with improving the energy density of capacitors. Paluskinski will also discuss how his group has used nanotechnology to achieve better performance and reduced cost for photovoltaics applications serving to reduce fluctuations in output power while increasing conversion efficiency. Yuri Maletin of APowerCap Technologies will reveal how nano-engineered capacitors using inexpensive nanoporous carbon material can lead to improved performance, while reducing cost, in automotive, hand-tools, energy quality and power management applications and systems.

Applications and technology:

Additional presentations from ISE Corporation, Ionix Power Systems LLC, Sigma Technologies International, Rockport Capital and Battery Ventures will also be featured.

As one of the worlds leading forums for discussing the latest technical advances and market trends in the EC industry, IntertechPira’s Advanced Capacitors World Summit 2009 is a dynamic industry event, providing a unique opportunity to gain the necessary knowledge and network with global leaders from around the world.

For complete program details and registering options, please visit: www.advancedcapacitorsws.com

Members of the press interested in attending, to find out if you qualify for a complimentary press pass, please contact Press Officer Sheri Bonnell at sheri.bonnell@pira-international.com or +1 207 781 9637.