Suntan Gold Capacitor Charging and Discharging

Suntan Technology Company Limited
----All Kinds of Capacitors

Charging and discharging occurs by the absorption and release reaction of ions in the electric double-layer which is formed between the electrode layer and the electrolyte layer. Gold Capacitors are also called Electric Double Layer Capacitors.

Suntan Tantalum Capacitors Characteristics

Tantalum electrolytic capacitors exploit the tendency of tantalum to form a protective oxide surface layer, using tantalum powder, pressed into a pellet shape, as one "plate" of the capacitor, the oxide as the dielectric, and an electrolytic solution or conductive solid as the other "plate". Because the dielectric layer can be very thin (thinner than the similar layer in, for instance, an aluminium electrolytic capacitor), a high capacitance can be achieved in a small volume. Because of the size and weight advantages, tantalum capacitors are attractive for portable telephones, personal computers, and automotive electronics.

Suntan Ceramic Capacitor Operating Voltage and Frequency Characteristic

When sinusiodal or ripple voltage applied to DC Ceramic Disc Capacitors, be sure to maintain the peak-to-peak value or the Peak value of the sum of both AC + DC within the rated voltage.

When start or stop applying the voltage, resonance may generate irregular voltage.

When rectangular or Pulse Wave Voltage is applied to DC Ceramic Disc Capacitors, the self-heating generated by the capacitor is higher than the sinusoidal application with the same frequency. The allowable voltage rating for the rectangular or pulse wave corresponds approximately with the allowable voltage of a sinusoidal wave with the double fundamental frequency.

The allowable voltage varies, depending on the voltage and the waveform.

Suntan Silver mica capacitors

Silver mica capacitors, also known as silvered mica capacitors, rendered traditional mica capacitors obsolete. Instead of being clamped with foils these use sheets of mica coated on both sides with deposited metal. The assembly is dipped in epoxy. The advantages are:

1.greater stability, since there are no capacitive airgaps that can change dimension

2.airtight enclosure removes the risk of oxidation or corrosion of plates or connections.

3.greater capacitance per volume, since

  • there are no airgaps between plates and mica,
  • the conducting surfaces can be thinner.
  • no clamping mechanism is needed

Suntan Trimming Potentiometers Computation

In analog computers, high precision potentiometers are used to scale intermediate results by desired constant factors, or to set initial conditions for a calculation. A motor-driven potentiometer may be used as a function generator, using a non-linear resistance card to supply approximations to trigonometric functions. For example, the shaft rotation might represent an angle, and the voltage division ratio can be made proportional to the cosine of the angle.

Suntan offer high Voltage Chip Ceramic Capacitors

We noted a lot of customers are searching for high Voltage Chip Ceramic Capacitor in the market, such as 500V, 1KV, 2KV, 3KV , 4KV even 5KV. Suntan has a series to match customers demand very well. It is our TS18H High Voltage Chip Ceramic Capacitors. It is available with many different size like 0603, 0805, 1206, 1210, 1808, 1812 and 2225. This type of Ceramic Capacitor is good for application of DC-DC converter, circuit filter vibration bell of telephone, electrograph and modem because it has very good solderability , and can operate at high voltage levels. For any queries of this Ceramic Capacitors, pls. visit our product index in www.capacitors.hk.

Suntan show you the open up capacitors

Photo: Inside, an electrolytic capacitor is a bit like a Swiss roll. The "plates" are two very thin sheets of metal; the dielectric an oily plastic film in between them. The whole thing is wrapped up into a compact cylinder and coated in a protective metal case.

Warning: It can be dangerous to open up capacitors. First, they can hold very high voltages. Second, the dielectric is sometimes made of toxic or corrosive chemicals that can burn your skin.

Suntan Capacitors and battery's different

A capacitor is a bit like a battery, but it has a different job to do. A battery uses chemicals to store electrical energy and release it very slowly through a circuit—sometimes (in the case of a quartz watch) it can take several years. A capacitor generally releases its energy much more rapidly—often in seconds or less. If you're taking a flash photograph, for example, you need your camera to produce a huge burst of light in a fraction of a second. A capacitor attached to the flash gun charges up for a few seconds using energy from your camera's batteries. (It takes time to charge a capacitor and that's why you typically have to wait a little while to take a flash photo.) Once the capacitor is fully charged, it can release all that energy in an instant through the xenon flash bulb. Zap!

Capacitors come in all shapes and sizes, but they usually have the same basic components. There are the two conductors (known as plates, largely for historic reasons) and there's the insulator in between them (called the dielectric). The two plates inside a capacitor are wired to two electrical connections on the outside called terminals, which are like thin metal legs you can hook into an electric circuit.

Suntan How Cloud Capacitors Cause Lightning?

Suntan Technology Company Limited
----All Kinds of Capacitors 

When clouds drift through the sky, ice particles inside them rub against the air and gain static electrical charges—in just the same way that a balloon gets charged up when you rub it on your jumper. The top of a cloud becomes positively charged when smaller ice particles swirl upward (1); the bottom of a cloud becomes negatively charged when the heavier ice particles gather lower down (2). The separation of positive and negative charges in a cloud makes a kind of moving capacitor!

As a cloud floats along, the electric charge it contains affects things on the ground beneath it. The huge negative charge at the bottom of the cloud repels negative charge away from it, so the ground effectively becomes positively charged (3). The separation of charge between the bottom of the cloud and the ground beneath means that this area of the atmosphere is also, effectively, a capacitor.

Over time, enormous electrical charges can build up inside clouds. If the charge is really big, the cloud contains an enormous amount of electrical potential energy (it has a really high voltage). When the voltage reaches a certain level (sometimes several hundred million volts), the air is transformed from being an insulator into a conductor, and electricity will flow through it as though it were a metal wire, creating a giant spark better known as a bolt of lightning (4). The cloud behaves like a flash gun in a camera: the huge electrical energy stored in its "capacitor" is discharged in an instant and converted into a flash of light.

Suntan Tell You How do We Measure Capacitance?

Suntan Technology Company Limited
----All Kinds of Capacitors

The size of a capacitor is measured in units called farads (F), named for English electrical pioneer Michael Faraday (1791–1867). One farad is a huge amount of capacitance so, in practice, most of the capacitors we come across are just fractions of a farad—typically microfarads (thousandths of a farad, written μF), nanofarads (thousand-millionths of a farad written nF), and picofarads (million millionths of a farad, written pF). Supercapacitors store far bigger charges, sometimes rated in thousands of farads.